/*
* This file is part of the Chelsio T3 Ethernet driver.
*
* Copyright (C) 2005-2010 Chelsio Communications. All rights reserved.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this
* release for licensing terms and conditions.
*/

Release 2.0.1.5 (04/09/2010)
----------------------------------------

- Fixed issue in CLI for assigning and removing VLANID to interface.

Errata:
-------

- If more than one VLAN is configured on a team or physical NIC and traffic is run on one of the VLANs then all the VLANs
will show the same traffic stats.

- The chteamcfg.exe utility does not allow teaming of non Chelsio NICs even though third party adapters are shown under
"Unassigned Adapters" list.

- It is recommended to keep the VLAN ID field in the "Advanced Properties" section of physical NICs being teamed to the default value of 0.

- Once a VLAN is created on a teamed or physical nic through chteamcfg.exe, the VLAN ID field in the "Advanced Properties" section of the underlying physical NIC should not be modified.

- All Network Connections window should be terminated / closed prior to launching of the Install Shield Application.


Release 2.0.1.3 (03/26/2010)
----------------------------

- Added support for automatically negotiating different parameters while teaming of NICs.
- Added support to dynamically change the configuration of underlying NICs after a team is created.
- Added support for creating VLANs on physical and teamed adapters.

Errata:
-------

- If more than one VLAN is configured on a team or physical NIC and traffic is run on one of the VLANs then all the VLANs
will show the same traffic stats.

- The chteamcfg.exe utility does not allow teaming of non Chelsio NICs even though third party adapters are shown under
"Unassigned Adapters" list.

- It is recommended to keep the VLAN ID field in the "Advanced Properties" section of physical nics being teamed to the default value of 0.

- Once a VLAN is created on a teamed or physical nic through chteamcfg.exe, the VLAN ID field in the "Advanced Properties" section of the underlying
physical NIC should not be modified.

- ChelsioTeaming CLI Utility doesn't have support for performing any VLAN related operations.

- All Chelsio Teaming Utilities (chteamcfg.exe (GUI application) / chteamcmd.exe (CLI application) / chtray.exe (Tray Icon application))
and Network Connections window should be terminated / closed prior to launching of the Install Shield Application.


Release 1.4.3.7 (11/10/2009)
-----------------------------
- Added support for NDIS 6.0
- Fixed several issues in LACP mode
- Added more information in CLI mode
- Fixed incorrect display of statistics
- Fixed GUI and driver hang occuring during team removal

Release 1.4.0.0 (03/23/2009)
-----------------------------
- Fixed a CLI issue while listing and unlisting network adapters

Release 1.4.0.0 (01/30/2009)
-----------------------------
- Added support for Chimney Offload failover
- Added event log to show the active adapter

Release 1.3.0.0 (10/13/2008)
-----------------------------
- Fixed a Config GUI hang
- Added multi-processor support
- Improved performance for multiple TCP connections

Release 1.1.2.1 (04/03/2008)
-----------------------------
This is the first release of Teaming driver. It provides the capability
to team chelsio NIC adapters.