Configuring RDMA + TOE Drivers

To utilize both RDMA and TOE on the Chelsio device, you must install the ofed-1.2 distribution _followed by_ the Chelsio cxgb3toe kit.
The procedures below are a quick check-list on how to do this:

- Download the ofed-1.2 distribution.

- cd into the top level directory.

- Run build.sh to build the ofed rpms. Make sure you select the cxgb3 kernel driver and library to enable the Chelsio device.

- Install the newly built ofed rpms.

- Download the cxgb3toe kit.

- cd into the top level directory.

- Run 'make && make install'.

- Load the rdma driver with 'modprobe --force iw_cxgb3' and the TOE driver with 'modprobe t3_tom'.