CHANGES
cxgb3toe-1.0.106, 28 Jun 2007
* Fix t3_tom load on 32-bit platforms.

cxgb3toe-1.0.104, 22 Jun 2007
* Fix MC5 initialization for TCAM filter dumps.
* Remove EEPROM auto-updater on 2.4 kernels, which was causing errors.
  The 2.4 series kernels do not have the FW_LOADER mechanism so FW and
  EEPROM cannot be auto-loaded.
* Fix error code if MSI-X activation fails.
* Fix kernel panic when using zero copy with an application that statically
  allocates memory.
* Update protocol SRAM image to v1.1.0.
* Perform protocol SRAM version check when interface is enabled.
* Add TP protocol SRAM version in "ethtool -i".
* Update FW to v4.3.0, adding RDMA enhancements and fix potential TOE
  connection hang.
* Check if MSI/MSI-X works on system before using it, this should workaround
  issues with buggy PCI-X chipsets (AMD-8131).
* Display correct error code if MSI-X activation fails.
* Fix reading MAC statistics before HW is fully initialized.


cxgb3toe-1.0.094, 01 Jun 2007
* Update protocol SRAM and EEPROM, fix 2-port throughput issues.
* Network interface no longer needs to be disabled to change MTU.
* Fix LRO bug causing kernel panic with MTU > 1500 bytes.


cxgb3toe-1.0.092, 15 May 2007
* Update firmware to 4.1.0, give more priority to CTRL traffic.
* Performance tweaks.
* Fix VLAN extraction count with LRO.
* Fix TX pause toggle issue.
* Enforce MTU change allowed only if interface is down.
* Fix Nforce 2050 PCI-E issue.


cxgb3toe-1.0.087, 20 Apr 2007
* Fix connection timeout while running large number of TCP connections.
* Fix failure case when applications use half close shutdown().
* Fix kernel panic after killing processes while running near maximum
  offload connections.
* Add retry to fix 4-tuple reused within 1/2 second of closing prior
  connection with the same 4-tuple.
* Update firmware to 4.0.0, fix various bugs and race conditions.


cxgb3toe-1.0.084, 11 Apr 2007
* Fix interface not responding bug when running continuous interface
  enable/disable cycles.
* Add Linux 2.6.12 support.
* Add Redhat Enterprise Linux 3 support (2.4.21-xx.EL)


cxgb3toe-1.0.078, 03 Apr 2007
* Fix DDP bug when running several hundred connections with large TX socket
  buffers, it was possible to exhaust onboard TX memory.
* Fix link LED on S320 cards.
* Fix bug when consuming max offloaded connections, new connections would
  not be setup on non-offload path.
* Partial fix to link LED on CX4 cards. Link LED will not always remain
  illuminated with cable disconnected.
* Fixes to XGMAC workaround.
* Add netdump support for single receive queue.
* Update firmware to version 3.3.0.
* Add NIC/TOE support for Linux kernels 2.6.9, 2.6.19, and 2.6.20.
* Add NIC support for SLES9 SP3 (2.6.5-7.244).
* Fix Makefile uninstall.
* Update performance tuning parameters in perftune.sh script.
* Remove obsolete options from cxgbtool.
* Add support for N-based cards.


cxgb3toe-1.0.071, 19 Mar 2007
* Initial Alpha release.
